Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
How to Setup TP Link AC1200 (RE300) Wi-Fi Extender in 2023
Are you seeking for a device that can provide a continuous coverage of a wireless network even to wider areas? If you answered yes to either of these questions, the TP-Link AC1200 RE300 is the gadget for you because it is an affordable solution that will extend the range of your current router. This gadget offers complete coverage, a high download speed, and a straightforward process for initial configuration. All that is required of you is to connect the TP-Link RE300 extender to a power source that is in close proximity to your router. This guide will walk you through the process of installing and configuring a TP Link AC1200 (RE300) Wi-Fi Extender. So let’s get started:
How to Setup TP Link AC1200 (RE300) Wi-Fi Extender
1. Turn on the power supply after connecting your RE300 extender to the power source and turning it on. When you get to the portion of the installation when you plug your extender in close to your router, wait for the power LED light on the extender to turn solid green before proceeding.
2. The next step is to download the Tether app on your mobile device by browsing to the Google Play Store or the Apple App Store.
3. Launch the wireless settings on your mobile device, and then select the Wi-Fi option to begin the search for available networks. Connect your device to the network created by your TP-link extender by selecting the TP-Link Extender network and entering the wireless password.
4. Now, open the Tether app by clicking on the button labelled “Tether,” and then establish a new login account by providing your username and password. If you already have an account, you can log in by selecting the ‘Sign in’ button and entering the login credentials for the tplink repeater.
5. To locate a list of available wifi networks, use the “Scan Now” option from the menu. It is necessary for you to decide upon a network name for your router. In order to join to the main router’s network, you will need to enter its wireless password.
6. When you are finished, you should double check all of the configurations you have made, including the settings for your host and the extended network. To conclude the process of setting up the Tplink repeater, click the Finish button.
Why is my TP Link extender not connecting to Internet?
Verify that the end devices have an adequate wireless signal strength. Remove the profile of the wireless network and reconnect it if there is only one end device that is unable to join the Wi-Fi network that the range extender is providing. And then connect it directly to your router to check whether it can establish a connection.
Why is my WiFi extender not connecting?
You will need to do a factory reset on your Wi-Fi extender if it is unable to establish a connection with the Wi-Fi router. It’s possible that different brands of extenders will have different placements for the button that resets the device. You’ll find the button to reset your extender on the back of the device; use a needle to press it and hold it down for ten seconds.
How do I manually connect a Wi-Fi extender?
Connect your Range Extender to a power outlet that is located close to your primary router or access point. 2. First, press the WPS button located on your primary router or access point, then, without pausing, press the WPS button located on your range extender. Note1: After pressing the WPS button on your router or access point (AP), you must then press the WPS button on your range extender within the next two minutes.
Do you connect directly to a Wi-Fi extender?
To begin, locate a power outlet in the same room as the wireless router and put the extender into that outlet. In order to connect two devices using certain extenders, you will need to hit the WPS button on each of the devices. In order to complete the installation of some, you are required to visit a particular website.
What is WPS on a router?
Wi-Fi Protected Setup, sometimes known as WPS, is a feature that is included with a good number of routers. It is intended to simplify the steps required to join a computer or other device to a safe wireless network so that users can do so more quickly.
